In control theory the Youla–Kučera parametrization (also simply known as Youla parametrization) is a formula that describes all possible stabilizing feedback controllers for a given plant P, as function of a single parameter Q.

Details

The YK parametrization is a general result. It is a fundamental result of control theory and launched an entirely new area of research and found application, among others, in optimal and robust control.[1] The engineering significance of the YK formula is that if one wants to find a stabilizing controller that meets some additional criterion, one can adjust the parameter Q such that the desired criterion is met.

For ease of understanding and as suggested by Kučera it is best described for three increasingly general kinds of plant.

Stable SISO plant

Let be a transfer function of a stable single-input single-output system (SISO) system. Further, let be a set of stable and proper functions of . Then, the set of all proper stabilizing controllers for the plant can be defined as

,

where is an arbitrary proper and stable function of s. It can be said, that parametrizes all stabilizing controllers for the plant .

General SISO plant

Consider a general plant with a transfer function . Further, the transfer function can be factorized as

, where , are stable and proper functions of s.

Now, solve the Bézout's identity of the form

,

where the variables to be found must be also proper and stable.

After proper and stable are found, we can define one stabilizing controller that is of the form . After we have one stabilizing controller at hand, we can define all stabilizing controllers using a parameter that is proper and stable. The set of all stabilizing controllers is defined as

.

General MIMO plant

In a multiple-input multiple-output (MIMO) system, consider a transfer matrix . It can be factorized using right coprime factors or left factors . The factors must be proper, stable and doubly coprime, which ensures that the system is controllable and observable. This can be written by Bézout identity of the form:

.

After finding that are stable and proper, we can define the set of all stabilizing controllers using left or right factor, provided having negative feedback.

where is an arbitrary stable and proper parameter.

Let be the transfer function of the plant and let be a stabilizing controller. Let their right coprime factorizations be:

then all stabilizing controllers can be written as

where is stable and proper.[2]

References

  1. V. Kučera. A Method to Teach the Parameterization of All Stabilizing Controllers. 18th IFAC World Congress. Italy, Milan, 2011.
  2. Cellier: Lecture Notes on Numerical Methods for control, Ch. 24
  • D. C. Youla, H. A. Jabri, J. J. Bongiorno: Modern Wiener-Hopf design of optimal controllers: part II, IEEE Trans. Automat. Contr., AC-21 (1976) pp319–338
  • V. Kučera: Stability of discrete linear feedback systems. In: Proceedings of the 6th IFAC. World Congress, Boston, MA, USA, (1975).
  • C. A. Desoer, R.-W. Liu, J. Murray, R. Saeks. Feedback system design: the fractional representation approach to analysis and synthesis. IEEE Trans. Automat. Contr., AC-25 (3), (1980) pp399–412
  • John Doyle, Bruce Francis, Allen Tannenbaum. Feedback control theory. (1990).
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.