XS
Role Paramotor
National origin South Africa
Manufacturer Xplorer UltraFlight
Designer Keith Pickersgill
Status Production completed

The Xplorer XS is a South African paramotor that was designed by Keith Pickersgill and produced by Xplorer UltraFlight of Cape Town for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.[1]

Design and development

The XS was designed to comply with the US FAR 103 Ultralight Vehicles rules as well as European regulations. It features a paraglider-style wing, single-place accommodation and a single 15 hp (11 kW) Solo 210 engine in pusher configuration with a 2.5:1 ratio reduction drive and a 100 cm (39 in) diameter two-bladed wooden propeller. The cage assembly breaks down into four parts for ground transport and storage. The fuel tank capacity is 10 litres (2.2 imp gal; 2.6 US gal). The aircraft is built from annealed aluminium.[1]

As is the case with all paramotors, take-off and landing is accomplished by foot. Inflight steering is accomplished via handles that actuate the canopy brakes, creating roll and yaw.[1]

Specifications (XS)

Data from Bertrand[1]

General characteristics

  • Crew: one
  • Fuel capacity: 10 litres (2.2 imp gal; 2.6 US gal)
  • Powerplant: 1 × Solo 210 single cylinder, two-stroke, air-cooled aircraft engine, with a 2.5:1 reduction drive, 11 kW (15 hp)
  • Propellers: 2-bladed wooden, fixed pitch, 1.00 m (3 ft 3 in) diameter

See also

References

  1. 1 2 3 4 Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 77. Pagefast Ltd, Lancaster UK, 2003. ISSN 1368-485X
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.