Alfa Romeo D2
Type nine-cylinder radial engine
Manufacturer Alfa Romeo
First run 1930s
Number built ~600

The Alfa Romeo D2 was a nine-cylinder radial engine for aircraft use produced in Italy. It was typically rated between 240 and 270 hp. The engine was designed by Vittorio Jano, 600 units were produced between 1931 and 1934.[1] This engine was also the first purpose-built aircraft engine produced by Alfa Romeo, previous Alfa engines used in aircraft were derived from engines used in cars. A supercharged derivative was produced as the D2 C.30.[2]

D2C supercharged derivative

Applications

Specifications (D2 C.30)

Data from Jane's.[2]

General characteristics

Components

  • Valvetrain: dual cam ring driving 2 overhead valves per cylinder via push-rods and rockers
  • Supercharger: 2.5:1
  • Fuel system: Memini carburettor with automatic servo-boost control
  • Oil system: dual gear pumps
  • 2x Marelli MF.9 magnetos

Performance

  • Power output: normal 205 kW (275 hp) at 2,000 rpm at 2,500 m (8,200 ft); maximum 230 kW (310 hp) at 2,200 rpm at 2,250 m (7,380 ft)
  • Compression ratio: 5:1

See also

Related lists

References

  1. "STORY OF THE ALFA ROMEO FACTORY AND PLANTS page 12" (PDF). enzociliberto.it. Archived from the original (PDF) on 2007-09-29. Retrieved 2007-08-25.
  2. 1 2 Jane's All the World's Aircraft 1937. London: Sampson, Low & Martin company Limited. 1937. p. 67d.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.