Wimanius
Temporal range: Middle Triassic, late
Scientific classification Edit this classification
Domain: Eukaryota
Kingdom: Animalia
Phylum: Chordata
Class: Reptilia
Order: Ichthyosauria
Family: Wimaniidae
Maisch, 2010
Genus: Wimanius
Maisch & Matzke, 1998
Species:
W. odontopalatus
Binomial name
Wimanius odontopalatus
Maisch & Matzke, 1998

Wimanius is a genus of ichthyosaur from the Middle Triassic of Switzerland, containing a single species, Wimanius odontopalatus. It was described by Michael Maisch and Andreas Matzke in 1998 based on an incomplete skull from Monte San Giorgio, a mountain on the Swiss-Italian border. Wimanius possesses teeth on its palate, though whether they were located on the palatine or pterygoid is disputed. Other features of Wimanius include a large orbit and jugals with two rami of similar lengths. Different phylogenetic placements of Wimanius have been recovered by different studies, including it being a mixosaurid relative or a merriamosaur, and a monotypic family, Wimaniidae has been named for it. However, its validity has also been questioned, and synonymy with various other genera has been proposed.

Discovery

A view of Monte San Giorgio, where Wimanius was found

The type and only specimen of Wimanius was first recognized as belonging to a new genus by Michael Maisch and Andreas Matzke while examining Mixosaurus specimens in the Museum für Geologie und Paläontologie der Universität Tübingen. This specimen, numbered GPIT 1797, is a partial, crushed skull, consisting of a well-preserved lower jaw and upper part of the snout in addition to further elements from the temporal region, braincase, palate, region around the orbits, and the very incomplete skull roof.[1][2] This skull originated from Monte San Giorgio in Switzerland, recovered from the Grenzbitumenzone of the Besano Formation. The specimen was found in the middle part of the Grenzbitumenzone, dating to the late Anisian, near the border between the Anisian and Ladinian stages of the Middle Triassic.[1][3][4]:62 The Middle Triassic dolomites and shales of Monte San Giorgio in Italy and Switzerland are rich in fossils and have yielded many marine reptiles, including the ichthyosaurs Besanosaurus, Cymbospondylus, and the especially common Mixosaurus.[5][6][7] Wimanius odontopalatus was named in 1998 by Maisch and Matzke, the genus name honoring Swedish paleontologist Carl Wiman and the species name referring to the presence of teeth on the palate, an unusual feature for an ichthyosaur.[1]

Description

The foremost bones in the snout of Wimanius, the premaxillae, are long and thin. Next to the tooth row, each premaxilla is marked with a palatal ridge on its inner surface.[1] The premaxillae would not have extended over the external nares, the openings for the nostrils.[2] Behind the premaxillae are the maxillae, each of which bear only nine teeth. The teeth do not extend below the weakly hooked upwards-projecting processes of the maxillae which form the external nares' back edges. The portions of the maxillae in front of these processes are short[2] and shallow, while those behind them are plate-like and tapering, and bear a ridge marking where the jugal articulated. The nasal bones are mostly narrow but are broad and flat toward their hind ends.[1] They do not seem to have extended very far back on the skull roof.[2] A poorly preserved, curved bone was tentatively identified as a postfrontal by Maisch and Matzke in 1998,[1] but they backtracked on this identification the following year.[2]

The jugal is a thin bone, consisting of two rami of the same length[2] that intersect in a curved, 110-degree angle.[1] While this shape is like that of some leptonectids, no other Triassic ichthyosaur features such a shape.[2] The lower of the two rami bears a ridge along its top and its outer surface is bowed inwards. The other ramus rises vertically and is thick and keeled, with the postorbital probably being located in front of it. Therefore, the rear portion of the orbit would have been formed by the crescentic postorbital.[1] Based on their reconstruction of the skull, Maisch and Matzke found Wimanius to have had very large orbits, proportionally the largest known among Triassic ichthyosaurs at the time, resulting in the back part of the skull being rather tall. However, they considered this possibly the result of the specimen being a juvenile. A circle of bony plates within the orbit known as the sclerotic ring would have supported the eye; while only two of these plates are known in the holotype,[1] Maisch and Matzke estimated that a complete ring would have 13 or 14 in total based on their reconstructed orbit size. These plates are quite large in Wimanius, which gave the ring a rather small inner diameter.[2]

The portion of the skull behind the orbits is reduced in length, though this again may be due to the specimen being a juvenile.[2] The supratemporals are triradiate bones in this skull region. Two of their processes contributed to the rim of the supratemporal fenestrae, one process large, wide, quadrangular and reaching forwards, the other thin and extending towards the midline. The third, backwards-projecting process is reduced. A probable squamosal is also known, but incomplete and poorly preserved.[1][2] The quadratojugals are flat, roughly triangular bones in the postorbital region, with more or less straight rear and lower edges and bowed upper edges. Maisch and Matzke considered it probable that the jugal and the front lower portion of the quadratojugal were in contact in life. A distinct, constricted process on the quadratojugal would have articulated with the quadrate, the cranial bone involved in the jaw joint not preserved in the holotype.[1] Based on the quadratojugal's shape, Maisch and Matzke predicted that a large opening would have been present between these two bones in their 1999 reconstruction.[2]

Wimanius possesses palatal teeth, though what bone they are located on is disputed due to the poor preservation of its palatal bones.[8] Maisch and Matzke considered the "flake-like" bone upon which these teeth are situated to be a palatine in their original description, citing the presence of teeth on this bone in Grippia.[1] In 1999, however, Ryosuke Motani argued that the tooth-bearing palatal bone was instead likely the pterygoid as in Utatsusaurus, noting that the supposed palatal teeth of Grippia were instead additional rows of maxillary teeth.[9] Spread over an area about 17 millimetres (0.67 in) long, the palatal teeth are arranged in one or two rows in different regions, and oriented from front to back. The most complete of these teeth is only about 1 millimetre (0.039 in) tall, with a smooth-sided conical crown and a coarse root.[1]

The bone Maisch and Matzke identified as a pterygoid has a straight inner edge, indicating that the pterygoids would have enclosed little space between each other when articulated. This bone possesses a robust process on the outer side interpreted as articulating with the quadrate,[1] and a prominent backwards projection on its inner side, the posteromedial process.[2] Wimanius has a quadrangular supraoccipital, a midline braincase bone, which forms the top part of the opening of the foramen magnum, semicircular in this taxon. The otic capsules would have been attached to the supraoccipital on well-developed facets. Maisch and Matzke tentatively identified a small, flat, and narrow bone as a stapes. Unusually, this bone has a forked end, more typical of a temnospondyl than an ichthyosaur,[1] though such a morphology has been reported in Phalarodon.[2]

The lower jaw of Wimanius measures around 25 centimetres (9.8 in) in the holotype, indicating that the animal was probably rather small.[1] The dentaries reach as far back along the lower jaw as the level of the coronoid processes.[2] Wimanius has a low eminence situated on the surangular in front of the jaw joint,[2] the surangulars being long and reinforced rear mandibular bones. The surangulars are upcurved and located directly above the angulars.[1] The teeth of Wimanius are all straight and cone-shaped, with each tooth being set into a distinct socket. The tooth crowns bear vertical striations, which are more strongly pronounced at their bases than at the tips, but lack cutting edges. This ornamentation is less pronounced on the known lower teeth than the upper teeth. In both jaws, tooth size is smaller at the front and larger at the back.[1]

Classification and validity

In their 1998 paper naming Wimanius, Maisch and Matzke noted that the fragmentary nature of the only known specimen made it difficult to determine how to classify it with much confidence. They noted that it did not seem to closely resemble either mixosaurids or shastasaurids, though they considered it to be more closely related to the latter group, and, by extension, ichthyosaurs from the Jurassic and Cretaceous.[1] However, in the following year, the same authors restudied the skull and found it to more closely resemble a mixosaurid; therefore they proposed it to potentially be closely related to that group instead. However, they also considered it possible that Wimanius branched off earlier in ichthyosaur evolution. They compared it to Mikadocephalus, another ichthyosaur from Monte San Giorgio, and considered the two to be very different in a variety of features.[2]

Reconstructed skull of Besanosaurus, a genus that Wimanius has been proposed to be a synonym of

In 1999, Motani classified Wimanius as Ichthyosauria incertae sedis. Additionally, he noted that while Wimanius and Mikadocephalus did differ in some aspects, they were quite similar in others, therefore arguging that further study was needed before the distinctiveness of Wimanius could be confirmed.[9] In 2000, Martin Sander also expressed doubt over whether Wimanius was valid and stated that further study would be needed on the ichthyosaurs of the region to determine this. In addition to noting its similarity to Mikadocephalus, he also argued that Mikadocephalus was probably synonymous with Besanosaurus. Sander classified Wimanius as a shastasaurid and considered it possible that it represented a juvenile Besanosaurus.[10] However, Maisch and Matzke considered Wimanius to be a valid, diagnosable taxon in 2000, including it in their phylogenetic analysis and finding it to be the sister taxon of Mixosauridae.[4]:1,62,95

In a 2003 book with Christopher McGowan, Motani considered that both Wimanius and Mikadocephalus might be junior synonyms of the taxonomically problematic Pessosaurus. However, as he had not personally observered the relevant specimens he refrained from formally synonymizing the taxa, instead listing them as species inquirendae.[11]:127–128 In 2010, Maisch named a new monotypic family, Wimaniidae, using the name Mixosauria for the group consisting of it and mixosaurids. Noting the distance between Wimanius and Mikadocephalus in this classification, he reiterated his argument that Wimanius was a distinct genus from Mikadocephalus, considering the evidence for this synonymy to be lacking.[12] The phylogenetic analyses of Ben Moon in 2017 found a different placement for Wimanius, among the more derived group Merriamosauria.[13] Wimanius was listed as a shastasaurid by Judith M. Pardo-Pérez and colleagues in 2020[3] and treated as potentially invalid by Ya-Lei Yin and colleagues in 2021, following McGowan and Motani's 2003 publication.[8]

See also

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Maisch, M.W.; Matzke, A.T. (1998). "Observations on Triassic ichthyosaurs. Part II: A new ichthyosaur with palatal teeth from Monte San Giorgio". Neues Jahrbuch für Geologie und Paläontologie, Monatshefte. 1998 (1): 26–41. doi:10.1127/njgpm/1998/1998/26.
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Maisch, M.W.; Matzke, A.T. (1999). "Observations on Triassic ichthyosaurs. Part V. The skulls of Mikadocephalus and Wimanius reconstructed". Neues Jahrbuch für Geologie und Paläontologie, Monatshefte. 1999 (6): 345–356. doi:10.1127/njgpm/1999/1999/345.
  3. 1 2 Pardo-Pérez, J.M.; Kear, B.P.; Maxwell, E.E. (2020). "Skeletal pathologies track body plan evolution in ichthyosaurs". Scientific Reports. 10 (1): 4206. Bibcode:2020NatSR..10.4206P. doi:10.1038/s41598-020-61070-7. PMC 7060314. PMID 32144303.
  4. 1 2 3 Maisch, M.W.; Matzke, A.T. (2000). "The Ichthyosauria". Stuttgarter Beiträge zur Naturkunde, Serie B. 298: 1–159.
  5. Bindellini, G.; Wolniewicz, A.S.; Miedema, F.; Scheyer, T.M.; Dal Sasso, C. (2021). "Cranial anatomy of Besanosaurus leptorhynchus Dal Sasso & Pinna, 1996 (Reptilia: Ichthyosauria) from the Middle Triassic Besano Formation of Monte San Giorgio, Italy/Switzerland: Taxonomic and palaeobiological implications". PeerJ. 9: e11179. doi:10.7717/peerj.11179. PMC 8106916. PMID 33996277. S2CID 234494107.
  6. Sander, P.M. (1989). "The large ichthyosaur Cymbospondylus buchseri, sp. nov., from the Middle Triassic of Monte San Giorgio (Switzerland), with a survey of the genus in Europe". Journal of Vertebrate Paleontology. 9 (2): 163–173. Bibcode:1989JVPal...9..163S. doi:10.1080/02724634.1989.10011750.
  7. Dal Sasso, C.; Pinna, G. (1996). "Besanosaurus leptorhynchus n. gen. n. sp., a new shastasaurid ichthyosaur from the Middle Triassic of Besano (Lombardy, N. Italy)". Paleontologia Lombarda. 4: 3–23.
  8. 1 2 Yin, Y.; Ji, C.; Zhou, M. (2021). "The anatomy of the palate in Early Triassic Chaohusaurus brevifemoralis (Reptilia: Ichthyosauriformes) based on digital reconstruction". PeerJ. 9: e11727. doi:10.7717/peerj.11727. PMC 8269639. PMID 34268013. S2CID 235901598.
  9. 1 2 Motani, R. (1999). "Phylogeny of the Ichthyopterygia" (PDF). Journal of Vertebrate Paleontology. 19 (3): 473–496. Bibcode:1999JVPal..19..473M. doi:10.1080/02724634.1999.10011160. Archived from the original (PDF) on 2012-04-15.
  10. Sander, P.M. (2000). "Ichthyosauria: Their diversity, distribution, and phylogeny". Paläontologische Zeitschrift. 74 (1): 1–35. doi:10.1007/BF02987949. S2CID 85352593.
  11. McGowan, C.; Motani, R. (2003). Sues, H.D. (ed.). Handbook of Paleoherpetology Part 8: Ichthyopterygia. Munich: Verlag Dr. Friedrich Pfeil. ISBN 3899370074.
  12. Maisch, M.W. (2010). "Phylogeny, systematics, and origin of the Ichthyosauria – the state of the art" (PDF). Palaeodiversity. 3: 151–214.
  13. 1 2 Moon, B.C. (2017). "A new phylogeny of ichthyosaurs (Reptilia: Diapsida)" (PDF). Journal of Systematic Palaeontology. 17 (2): 1–27. doi:10.1080/14772019.2017.1394922. hdl:1983/463e9f78-10b7-4262-9643-0454b4aa7763. S2CID 90912678.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.