Site 43
Launch sitePlesetsk Cosmodrome
Coordinates62°55′12″N 40°28′1″E / 62.92000°N 40.46694°E / 62.92000; 40.46694
Short namePu-43
OperatorRussian Space Forces
Total launches544
Launch pad(s)Two
Site 43/3 launch history
StatusActive
Launches223
First launch21 December 1965
R-7A Semyorka
Last launch27 October 2023
Soyuz-2.1b / Lotos-S1 №7
Associated
rockets
R-7A Semyorka (retired)
Vostok-2M (retired)
Voskhod (retired)
Molniya-M(retired)
Soyuz-U (retired)
Soyuz-2 (active)
Site 43/4 launch history
StatusActive
Launches321
First launch25 July 1967
R-7A Semyorka
Last launch27 December 2023
Soyuz-2.1v / Kosmos 2574
Associated
rockets
R-7A Semyorka (retired)
Vostok-2M (retired)
Voskhod (retired)
Molniya-M (retired)
Soyuz-U (retired)
Soyuz-M (retired)
Soyuz-2 (active)

Site 43, also known as SK-3 and SK-4, is a launch complex at the Plesetsk Cosmodrome in Russia. It consists of a two pads, Sites 43/3 and 43/4, and has been used by R-7 derived rockets since the early 1960s.

The site was originally built for use by R-7A Semyorka missiles. The first launch to use the complex was an R-7A test on 21 December 1965, from Site 43/3. The first launch from 43/4 followed on 25 July 1967.

After its retirement from service as a missile base, it was converted for use as a space launch complex. The first orbital launch was of a Voskhod rocket with Kosmos 313 on 3 December 1969.

Both pads were damaged by explosions in the 1980s. At 16:01 UTC on 18 March 1980, 48 people were killed when a Vostok-2M exploded during fueling operations at Pad 4. The disaster injured dozens more, while damaging the pad so severely that it was not used again until 1984. On 18 June 1987, a Soyuz-U rocket exploded at liftoff on Pad 3.[1] Both were rebuilt, and are in service as of 2009.

References

  1. Wade, Mark. "Plesetsk". Encyclopedia Astronautica. Archived from the original on August 20, 2016. Retrieved 24 October 2017.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.