Württemberg T 3
DRG Class 89.3-4
Locomotive 89 339 in Bochum Dahlhausen (5 October 1985)
Quantity1496
NumbersDRG 89 301-311
DRG 89 314–316
DRG 89 312–313
DRG 89 317–410
ManufacturersMaschinenfabrik Esslingen
MG Heilbronn, Krauss
Entered service1891–18961896–1913
Retired
Wheel arrangement0-6-0
Axle arrangementC n2
TypeGt 33.10Gt 33.12
Average axle load10,0 t12.0 t
Length over buffers8,505 mm (27 ft 10+34 in)
Driving wheel diameter1,045 mm (3 ft 5+14 in)
Top speed45 km/h (28 mph)
Boiler overpressure12 kg/cm2 (1,180 kPa; 171 psi)
Cylinder bore380 mm (14+1516 in)
Piston stroke540 mm (21+14 in)
Grate area1.00 m2 (10.8 sq ft)
Evaporative heating area63.90 m2 (687.8 sq ft)
PowerN.K.
Adhesive weight29,7 t35.7 t
Service weight29,7 t35.7 t
BrakesN.K:

The Württemberg T 3s were German steam locomotives with the Royal Württemberg State Railways (Königlich Württembergische Staats-Eisenbahnen) delivered between 1891 and 1913.

These tank locomotives were built for hauling goods trains and had three coupled axles but no carrying axles. All 110 examples went into the Deutsche Reichsbahn fleet where they were incorporated as DRG Class 89.3-4 in the numbering plan. By 1945 almost all of them had been retired or transferred to industry.

Three locomotives were rescued from the scrap yard, one of which is being presently restored to operational condition by the Railway Vehicle Preservation Society (Gesellschaft zur Erhaltung von Schienenfahrzeugen).

Württemberg T 3 L
DRG Class 89.4
Quantity4
Number rangeDRG 89 411
ManufacturersEsslingen
Heilbronn
Krauss
Entered service1894–1898
Retired
Wheel arrangement0-6-0
Axle arrangementC
Average axle load10.8 tonnes (10.6 long tons; 11.9 short tons)
Length over buffers8,920 mm (29 ft 3+18 in)
Ø Driving wheel1,045 mm (3 ft 5+14 in)
Top speed45 km/h (28 mph)
Boiler overpressure12 kg/cm2 (1,180 kPa; 171 psi)
Cylinder bore380 mm (14+1516 in)
Piston stroke540 mm (21+14 in)
Grate area1.00 m2 (10.8 sq ft)
Evaporative heating area63.90 m2 (687.8 sq ft)
PowerN.K.
Adhesive weight32.3 tonnes (31.8 long tons; 35.6 short tons)
Service weight32.3 tonnes (31.8 long tons; 35.6 short tons)
BrakesN.K.

The Class T 3 L engines of the Royal Württemberg State Railways were also 0-6-0 tank locomotives and intended for goods train duties. Four examples were built, of which one survived into the Deutsche Reichsbahn fleet and was numbered as 89 411 within Class 89.3-4 of the DRG renumbering plan.

These four 'specials' had a steerable axle and were somewhat longer than the other Württemberg T 3s. They were deployed on the lines from Schiltach to Schramberg and from Waldenburg to Künzelsau, but proved to have very high maintenance costs, with the result that three of them were retired by the Württemberg State Railways. The remaining one was taken over by the Reichsbahn, but was soon taken out of service as well.

See also

References

    • Hütter, Ingo (2021). Die Dampflokomotiven der Baureihen 60 bis 91 der DRG, DRB, DB, und DR (in German). Werl: DGEG Medien. pp. 324–328, 329. ISBN 978-3-946594-21-5.
    • Lohr, Hermann; Thielmann, Georg (1988). Lokomotiven württembergischer Eisenbahnen (EFA 2.6) (in German). Düsseldorf: Alba. pp. 112–116, 164. ISBN 3-87094-117-0.
    • Weisbrod, Manfred; Müller, Hans; Petznik, Wolfgang (1978). Dampflokomotiven deutscher Eisenbahnen, Baureihe 60–96 (EFA 1.3) (in German) (4th ed.). Düsseldorf: Alba. pp. 144–149. ISBN 3-87094-083-2.
    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.